Vision Sensor VOS2000-F226W-8MM-I
- Reads all standard 1-D and 2-D codes
- Reads DPM codes
- Multi code reading
- Output string formatting
- Code quality output
- 32 Jobs on-board can be saved
- Offline parameterization
- 1.2 megapixel resolution
- Integrated illumination
- Mechanical focus adjustment
in stock
2,379.00 USD
Netlist price. Your individual price will be calculated during checkout.
Unit Price
Quantity
Free Shipping
Purchase on Account
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of VOS2000-F226W-8MM-I
| Product Description |
|---|
| Vision sensor for 1-D and 2-D code reading; Resolution: 1280 x 960 pixels; Light source: integrated LED flash, white; Lens: M12 lens; Focal length: 8 mm |
| General specifications | ||
|---|---|---|
| Sensing range | 55 mm x 41 mm at 100 mm reading distance and min. module size of 0.1 mm (1-D and 2-D barcode) 355 mm x 266 mm at 600 mm reading distance and min. module size of 0.48 mm (1-D barcode) or 0.64 mm (2-D barcode) |
|
| Light source | Integrated LED lightning , white | |
| Picture detail | dependant of operating distance | |
| Readable codes | 1-D Codes: Code 128, Code 39, Int 2 of 5, Codabar, UPC-A/E, EAN-8/13, Code 11, Code 32, Plessey, MSI Plessey, Telepen, BC 412, Pharmacode, DataBar, Postcode, Trioptic
2-D Codes: Data Matrix, QR-Code, Micro QR-Code, PDF417, Micro PDF417, Aztec, Han Xin Code, Maxi Code, Grid Matrix, Dotcode |
|
| Trigger mode | Free-running or triggered externally | |
| Depth of focus | ± 5 % of the operating distance | |
| Focal length | 8 mm | |
| Evaluation frequency | 30 Hz | |
| Target velocity | max. 4 m/s | |
| Resolution | 1280 x 960 pixels | |
| Image sensor | 1/3" CMOS monochrom Global Shutter 3.75 µm pixel size |
|
| Lens | M12 integrated lens | |
| Parameterization/software | ||
| Parameter assignment | Parameterization via PC user interface VCT Tool | |
| Evaluation procedure | ||
| Identification and Verification | 1-D and 2-D codes | |
| Indicators/operating means | ||
| LED 1 | Steady blue: sensor started, not set up Steady green: job loaded, ready for execution Flashing green: job loaded and being executed, capture in progress Steady red: sensor fault |
|
| LED 2 | Flashing blue: starting (duration approx. 20 seconds) Steady green: measurement successful (Pass) Steady blue: measurement borderline (Recycle) Steady red: measurement unsuccessful (Fail) |
|
| LED 3 | Steady blue: warm reset or restart Steady red/green/yellow: network activity |
|
| Focus setting | Focus adjustable via centering | |
| Electrical specifications | ||
| Operating voltage | 12 ... 30 V DC | |
| No-load supply current | 300 mA | |
| Interface 1 | ||
| Interface type | Ethernet | |
| Protocol | PROFINET IO TCP/IP EtherNet/IP |
|
| Transfer rate | 100 MBit/s | |
| Interface 2 | ||
| Interface type | RS-232 , serial | |
| Transfer rate | 115.2 kBit/s | |
| Input | ||
| Input type | optically decoupled Inputs | |
| Input voltage | Logic low (OFF): 0 ... 3 V Logic high (ON): 11 ... 30 V Switching threshold: 12 V |
|
| Control input | Image capture trigger + 2 general purpose inputs 2 inputs can be used for job switching |
|
| Input current | 8 mA ( typical ) | |
| Internal protection circuit | 3 kΩ / 4000 V ( rms ) | |
| Switching delay | Switch-on time (ON): 20 µs Switch-off time (OFF): 10 µs Image capture trigger: 62 µs (until image capture is triggered) |
|
| Output | ||
| Output type | 3 general purpose outputs , freely programmable , optically decoupled | |
| Switching voltage | max. 30 V | |
| Switching current | max. 100 mA each output | |
| Switching delay | Switch-on time (ON): 150 µs Switch-off time (OFF): 50 µs |
|
| Standard conformity | ||
| Emitted interference | EN 61000-6-4:2007+A1:2011 | |
| Noise immunity | EN 61000-6-2:2005 | |
| Approvals and certificates | ||
| Approvals | CE | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
| Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP67 | |
| Connection | 8-pin M12 socket A-coded ; 12-pin M12 socket | |
| Material | ||
| Housing | anodized aluminum , plastic | |
| Optical face | Plastic pane | |
| Installation | Mounting bracket | |
| Mass | approx. 200 g | |
| Dimensions | ||
| Height | 57 mm | |
| Width | 58 mm | |
| Length | 61 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27310101 |
| ECLASS 12.0 | 27310101 |
| ECLASS 11.0 | 27310101 |
| ECLASS 10.0.1 | 27310101 |
| ECLASS 9.0 | 27310101 |
| ECLASS 8.0 | 27310101 |
| ECLASS 5.1 | 27310101 |
| ETIM 9.0 | EC002999 |
| ETIM 8.0 | EC002999 |
| ETIM 7.0 | EC002999 |
| ETIM 6.0 | EC002999 |
| ETIM 5.0 | EC002999 |
| UNSPSC 12.1 | 43211711 |
Details: VOS2000-F226W-8MM-I
Datasheet: VOS2000-F226W-8MM-I
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet VOS2000-F226W-8MM-I | 1346 KB | |
| Datenblatt VOS2000-F226W-8MM-I | 1347 KB |
Documents: VOS2000-F226W-8MM-I
CAD+CAE: VOS2000-F226W-8MM-I
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 1873 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: VOS2000-F226W-8MM-I
| Declaration of Conformity | File Type | File Size |
|---|---|---|
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 138 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 134 KB |
Software: VOS2000-F226W-8MM-I
| Device Driver | File Type | File Size |
|---|---|---|
| EDS / EDS | ZIP | 2 KB |
| GSD file / GSD-Datei | ZIP | 6 KB |
| Software Tools | ||
| Configuration Software VCT for VOS Vision Cameras / Konfigurations Software VCT für VOS Vision Kameras | ZIP | 25374 KB |
Associated Products: VOS2000-F226W-8MM-I
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
In stock
Contact Us
From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.
Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
+1 330 425-3555
© 2024 All Rights Reserved.
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.