Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
General specifications | ||
---|---|---|
Sensing range | 0 ... 4000 mm | |
Reference target | receiver | |
Transducer frequency | 120 kHz | |
Indicators/operating means | ||
LED green | alignment aid OFF: no ultrasonic signal flashing: uncertain area ON: positive reception |
|
LED yellow | switching state | |
Electrical specifications | ||
Operating voltage | 18 ... 30 V DC , ripple 10 %SS | |
No-load supply current | 35 mA emitter 25 mA receiver |
|
Output | ||
Output type | 2 switch outputs PNP, normally open/closed (complementary) | |
Rated operating current | 200 mA | |
Voltage drop | ≤ 2.5 V | |
Switch-on delay | 30 ... 3000 ms | |
Switch-off delay | 100 ms | |
Standard conformity | ||
Standards | EN 60947-5-2 | |
Ambient conditions | ||
Ambient temperature | 0 ... 60 °C (32 ... 140 °F) | |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
Mechanical specifications | ||
Connection type | Connector M12 x 1 , 4-pin | |
Degree of protection | IP65 | |
Material | ||
Housing | nickel plated brass, plastic components: Delrin | |
Mass | 190 g each sensor |
System | Classcode |
---|---|
ECLASS 13.0 | 27272801 |
ECLASS 12.0 | 27272801 |
ECLASS 11.0 | 27272801 |
ECLASS 10.0.1 | 27272801 |
ECLASS 9.0 | 27272801 |
ECLASS 8.0 | 27272801 |
ECLASS 5.1 | 27272801 |
ETIM 9.0 | EC001847 |
ETIM 8.0 | EC001847 |
ETIM 7.0 | EC001847 |
ETIM 6.0 | EC001847 |
ETIM 5.0 | EC001847 |
UNSPSC 12.1 | 41111960 |
Brief Instructions | Language | File Type | File Size |
---|---|---|---|
Instruction leaflet / Beipackzettel | ALL | 247 KB |
Accessories | ||||||
---|---|---|---|---|---|---|
|
||||||
|
||||||
|