Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827

Female cordset ML29 Kupplungsdose 3m 4polig

ML29 Kupplungsdose 3m 4polig
  • Special snap-in connector for ML29 series

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet excerpt: Technical data of  ML29 Kupplungsdose 3m 4polig

Product Description
Female cordset with 3 m cable for ML29 series sensors
General specifications
Number of pins4
Connection 1socket
Construction type 1straight
Threading 1M8
Connection 2cable end
Electrical specifications
Operating voltagemax. ... 30 V
Operating currentmax. 4 A
Ambient conditions
Ambient temperature-30 ... 90 °C (-22 ... 194 °F)
Pollution degree3
Mechanical specifications
Degree of protectionIP67 according to EN 60529 (when properly seated)
Material
BodyTPU, blue
CablePVC
Cable
Sheath diameter∅ 3.5 mm
Colorgrey
Cores4 x 0.14 mm2
Length3 m

Classifications

SystemClasscode
ECLASS 13.027060311
ECLASS 12.027060311
ECLASS 11.027060311
ECLASS 10.0.127060311
ECLASS 9.027060311
ECLASS 8.027279218
ECLASS 5.127279201
ETIM 9.0EC001855
ETIM 8.0EC001855
ETIM 7.0EC001855
ETIM 6.0EC001855
ETIM 5.0EC002585
UNSPSC 12.131251501

Details: ML29 Kupplungsdose 3m 4polig

Datasheet: ML29 Kupplungsdose 3m 4polig

DatasheetFile TypeFile Size
Datasheet ML29 Kupplungsdose 3m 4poligPDF184 KB
Fiche de données ML29 Kupplungsdose 3m 4poligPDF186 KB
Datenblatt ML29 Kupplungsdose 3m 4poligPDF184 KB
Hoja de datos ML29 Kupplungsdose 3m 4poligPDF190 KB

Associated Products: ML29 Kupplungsdose 3m 4polig

Accessory of
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: light-on, Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Light on version, Light source: IRED, Light type: modulated infrared light , 880 nm, Operating voltage: 11 ... 30 V DC, Test input: emitter deactivation at +UB ≤ 5 V DC, Switching type: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector, CCC approval: CCC approval / marking not required for products rated ≤36 V, Degree of protection: IP65fa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: dark-on, Signal output: 1 NPN output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: Transmitter switches off at +UB ≤ 5 V DC, Switching type: dark-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa
Single-beam monitoring with extremely narrow sensor, Integrated circuit, Test, Simple installation - Plug & Play, Ideal for installation in door profiles or frames, Construction type(S2): Rectangular type, Test input, Light source: IRED, Light type: modulated infrared light, Operating voltage: 11 ... 30 V DC, Test input: Test: emitter deactivation at 0 V, Switching type: light-on, Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collectorfa